86-0631-5975990
Beikaerte Road, Economic Technology Development Zone, Weihai, Shandong, China (Mainland)
Product Parameter
| |
Overall Length | 11' |
Overall Width | 30'' |
Overall Thickness | 4'' and 6'' |
Max Pressure PSI | 25 |
Max Riding Person | 1 |
Max Load(KG) | 150 |
Product Weight(KG) | 20 |
Packing Size(cm) | 88*45*25 |
FOB Port | Qingdao,China |
Standard Equipment | 1 Bravo Hand Pump 1Carry Bag 1 Dismountable Main Fin 1 Paddle 1 Repair Kit |
Product Cross-section
Product Material
Product Use
Standard Equipment
Product Package
What is Inflatable Paddle Board different with Epoxy Paddle Board (Hard Board)
Storage/Travel - The size of the paddle board when deflated is a little bigger than a rolled up sleeping bag so you can store it in a closet or any other small area that a hard paddle board would never fit. This is especially important to those who do not have the convenience of a large garage or space to store a hard board or have to take the stairs or an elevator going to and from the water. You can store and take an iSUP just about anywhere you may want it to go. As for travelling you can check it on to a plane or if taking a car no need to buy racks as you can throw it in the truck. If you do have a convenient place to store a hard board you may still want to consider an Inflatable as you can always leave it inflated while being stored but the option of deflating it and taking it on your next trip is still a possibility.
Is Inflatable Paddle Board Safety?
Durability/Safety Because an inflatable board is constructed of PVC (drop stitched for added strength) and air they cannot be cracked, dinged, snapped or otherwise damaged in the same manner as a hard board can be. For this reason they can be a great choice for high use applications in areas with hazards such as rocks, concrete dock pillars or less than careful kids. While no paddle board should be left in direct sunlight for an extended amount of time, an inflatable board will be much less temperamental and have no long lasting negative effects from being subjected to varying temperatures. Hard boards on the other hand are constructed from an EPS foam core which can become unstable in extreme temperatures and cause the board to delaminate in extreme circumstances.
Why Inflatable SUP?
Why are We Choose Sunshine Inflatable SUPs?
FAQ of inflatable paddle board
How do I use the hand pump to bring inflatable paddle board to high pressure?
When using the hand pump to inflate paddle board do not use only your hands and arms when the pressure gets higher. Use your body weight to push the handle of the hand pump down. Bend at the knees and lock your arms straight while putting all of your weight over the handle.
How do I inflate my paddle board quickly?
Get an inexpensive electric pump for mattress inflation sold in local retail stores. We recommend the Coleman Rechargeable pump for about $29. Use it to inflate paddle board to about 80% quickly, and then finish pumping to high pressure with provided hand pump.
How do I deflate the paddle board?
Open the valve cover, press slightly on the pushpin inside the valve with your finger tip to release some air pressure, then press completely and turn the pushpin in either direction, locking it in the open position. Turn the board fins up. Start rolling the board from the rear with the fins inside the roll. You can use a rubber bungee cord to wrap around the board to keep it from unrolling.
Why is air escaping from the valve as soon as the valve adaptor is disconnected?
Make sure that the pushpin inside the valve is locked in the upper position before you start pumping air into the board. When the valve push pin is in the upper position, it means that the valve is locked, and no air will escape when the valve adaptor is disengaged.
How do I know when the paddle board is fully inflated?
Saturn SOT330/365 paddle boards can take up to 12-15 psi of air pressure. SUP330/365 can take up to 15psi. We suggest that you use our high-pressure electric pump that automatically shuts off once full pressure is achieved. If you use a hand pump and the air pressure gauge is available or pump until you feel the board surface become as hard as a rock. If the board is fully inflated, it will not bend under your weight when you are stand up paddling. If you are using the Sunshine board as a sit-on-top kayak, high pressure is not as important as when standing on it. Just inflate the board until it is moderately hard and does not feel soft when you press it with your fingers.
How to use the provided hand pump with gauge?
Make sure you read instructions on the hand pump chamber. Apply oil to rubber seals inside pump and aluminum handle. Use double-action option to quickly fill up air chamber, then remove white plug and use single-action to finish inflation. Gauge will show air pressure on a down stroke only. If you want pressure gauge to show pressure readings continuously, then please remove rubber seal inside the valve adaptor.
My paddleboard seems to be a little bit tipsy, why?
First of all make sure that paddleboard is fully inflated. Our inflatable paddleboard can take up to 12-15 psi of air pressure. While it can be achieved with a regular hand pump, our electric high pressure pump is highly recommended for quick and complete inflation.
How does your factory do regarding quality control?
A: Quality is priority. we always attach great importance to quality controlling from the very beginning to the very end.
Our factory has gained government authentication.
Company Information
Weihai Sunshine Sups Co., Ltd. is one of the leading inflatable production company in China. Main products include PVC inflatable boats, hypalon military inflatable boats, RIB boats, various inflatable tents, PVC water entertainment products, marine engines, motorboat and so on.
Our expertise is in the custom design and manufacture of high quality inflatable boat.
If you are not clear about anything please feel free to contact us!
Tel:+86
